No. | Brand | s | A | M | H | L | h | R | K |
NP 023174 902 AI | - | - | - | - | - | - | - | - | - |
EE420751/421451D | - | - | - | - | - | - | - | - | - |
FCD8011241 | - | - | - | - | - | - | - | - | - |
67986 DW/20/21 D | - | - | - | - | - | - | - | - | - |
EE350750/351687 | - | - | - | - | - | - | - | - | - |
67790DW/67720/67721D | - | - | - | - | - | - | - | - | - |
H15002707A | - | - | - | - | 400.05 mm | 711.2 mm | 57.15 mm | - | - |
H247535/H247510D | - | - | - | - | - | - | - | - | - |
67790 D/20/21 D | - | - | - | - | - | - | 225 mm | - | - |
GE240ES 2RS | - | - | - | - | - | - | - | - | - |
M 240631 T/611 TD/611 D | - | - | - | - | - | - | - | - | - |
FC4056200E | - | - | - | - | - | - | - | - | - |
2687/1049 | - | - | - | - | - | - | - | - | - |
HH924349V1/HH924310D | - | - | - | - | - | - | - | - | - |
T441 | - | - | - | - | - | - | - | - | - |
NCF 18/800 V | - | - | - | - | 40.2 mm | - | - | 125 mm | - |
EE130900D-902ASSY | - | - | - | - | 377.825 mm | 679.45 mm | 60.325 mm | - | - |
29432 E | - | - | - | - | - | - | 25.654 mm | - | - |
T112 | - | - | - | - | - | - | - | - | - |
HM266449 | - | - | - | - | - | - | - | - | - |
HM271149 | - | - | - | - | - | - | - | - | - |
HM252349/HM252310CD-HM252349XC | - | - | - | - | - | - | - | - | - |
294/5 | - | - | - | - | 298.45 mm | - | - | - | - |
HM266449DW/410D/410D | - | - | - | - | - | - | - | - | - |
LM247748DW/LM247710-LM247710D Tapered Roller Bearings | D1:67 mm; B:10.5 mm; Mass housing washer:0.56 kg; r1,2 min.:1.1 mm; D:115 mm; |
NCF 18/670 V Tapered Roller Bearings | da:147.637 mm; h:43.656 mm; H1:152.4 mm; End plug (suffix Y):EPR 18; P180°:103 kN; J min.:396.875 mm; L:511.175 mm; N1:28.575 mm; Taconite seal:TER 138; Appropriate attachment bolt size G:1 in; H2:60.325 mm; H:305.594 mm; P90°:149 kN; Stabilizing ring:2 x SR-0-24; P150°:85.9 kN; Max. speed for Taconite seal:520 r/min; P120°:94.3 kN; Initial grease fill:481.95 g; J max.:441.325 mm; Cap bolt recommended tightening torque:400 N·m; |
H247549/H247510CD Tapered Roller Bearings | Basic Static Radial Load Rating Co:49000 N; Accessories:No Shield, no Seal,; Sealed Speed Rating n3:5600 rpm; Oil Speed Rating n2:7500 rpm; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:49500 N; d:40.000 mm; Fillet Radius ra:1.00 mm; D:80.0000 mm; B:30.20 mm; |
294/5 Cam Follower And Track Roller | Eye bolt:2 x 3/8-16 UNC; RG:3/4 NPT; P60°:301 kN; Cap bolt recommended tightening torque:813.5 N·m; End plug (suffix Y):EPR 18; J max.:434.975 mm; Labyrinth ring:2 x LOR 139; H:298.45 mm; J1:85.725 mm; Housing:SAFS 034 KA; Da:259.999 mm; Ca:86.614 mm; Initial grease fill:481.95 g; Cap bolt, SAE grade:8; H2:60.325 mm; P150°:105 kN; H1:152.4 mm; Appropriate attachment bolt size G:1 in; |
HM261049DW Tapered Roller Bearings | B:12.5 mm; F:12 mm; d:8 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.0059 kg; |
LM274449DGW-410-410D Thrust Roller Bearings | End plug (suffix Y):EPR 7; R2:21.431 mm; Mass pillow block:17.1 kg; P60°:83.2 kN; P180°:31.6 kN; ba:32.544 mm; A1:88.9 mm; H1:88.9 mm; h:36.513 mm; Bearing limiting speed:6000 r/min; P90°:49.8 kN; RG:3/8 NPT; da:57.15 mm; Appropriate attachment bolt size G:0.75 in; Ca:57.785 mm; Da:140 mm; A2:134.938 mm; R1:53.181 mm; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; |
FCDP150216715/HC/C4 Needle Roller Bearings | d:110.000 mm; Basic Dynamic Radial Load Rating C:270000 N; B:70.00 mm; Fillet Radius ra:3.00 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; D:320.0000 mm; Basic Static Radial Load Rating Co:260000 N; Sealed Speed Rating n3:1500 rpm; Grease Speed Rating Open/Shielded n1:2100 rpm; Accessories:Two Seals; |
LM65448DW-610-610D Tapered Roller Bearing Assemblies | Basic dynamic load rating C:27.5 kN; Attainable speed:6400 r/min; ra max.:0.3 mm; r3,4 min.:0.6 mm; r1,2 min.:0.3 mm; d:20 mm; H1:19 mm; H:28 mm; Angle between holes in outer ring (Pitch) α:45 °; Static axial stiffnes:680 N/µm; Fatigue load limit Pu:1.9 kN; Static moment stiffness:140 N·m/mrad; D2:43.2 mm; Mass bearing:0.58 kg; Basic static load rating C0:51 kN; d2:32.2 mm; Required attachment bolt size (DIN 912):M6; |
M 240631 T/611 TD/611 D Thrust Roller Bearings Video